Azure-Advanced-Networking

M02-Unit 7 Create a Virtual WAN by using Azure Portal

In this exercise, you will create a Virtual WAN for Contoso.

In this exercise, you will:

Estimated time: 65 minutes (including ~45 minutes deployment waiting time)

Task 1: Create a Virtual WAN

  1. From a browser, navigate to the Azure portal and sign in with your Azure account.

  2. In the portal, type Virtual WAN into the search box and select Virtual WANs from the results list.

    Search for Virtual WAN in Azure Portal.

  3. On the Virtual WAN page, select + Create.

  4. On the Create WAN page, on the Basics tab, fill in the following fields:

    • Subscription: Use the existing subscription

    • Resource group: ContosoResourceGroup

    • Resource group location: Choose a resource location from the dropdown. A WAN is a global resource and does not live in a particular region. However, you must select a region to manage and locate the WAN resource that you create.

    • Name: ContosoVirtualWAN

    • Type: Standard

  5. When you have finished filling out the fields, select Review +Create.

  6. Once validation passes, select Create to create the Virtual WAN.

  7. Wait for deployment to complete (this should take a couple of minutes) and select Go to resource.

Task 2: Create a hub by using Azure Portal

A hub contains gateways for site-to-site, ExpressRoute, or point-to-site functionality. It takes 30 minutes to create the site-to-site VPN gateway in the virtual hub. You must create a Virtual WAN before you can create a hub.

  1. On the Virtual WAN page, under Connectivity, select Hubs.

  2. On the Hubs page, select +New Hub to open the Create virtual hub page. Create Virtual Hub, Basics tab.

  3. On the Create virtual hub page Basics tab, complete the following fields:
    • Region: West US
    • Name: ContosoVirtualWANHub-WestUS
    • Hub private address space: 10.60.0.0/24
    • Virtual hub capacity: 2 Routing infrastructure units
    • Hub routing preference: VPN

  4. Select Next: Site-to-site.

  5. On the Site-to-site tab, complete the following fields:
    • Do you want to create a Site to site (VPN gateway)?: Yes
    • The AS Number field cannot be edited.
    • Gateway scale units: 1 scale unit = 500 Mbps x 2
    • Routing preference: leave the default

  6. Select Review + Create to validate.

  7. Once validation has completed, select Create to create the hub.

  8. After 30 minutes, Refresh to view the hub on the Hubs page.

Task 3: Connect a VNet to the Virtual Hub

  1. Locate the Virtual WAN that you created.

  2. In ContosoVirtualWAN, under Connectivity, select Virtual network connections.

    Virtual WAN configuration page with Virtual network connections highlighted.

  3. On ContosoVirtualWAN Virtual network connections, select + Add connection.

  4. In Add connection, use the following information to create the connection.

    • Connection name: ContosoVirtualWAN-to-ResearchVNet

    • Hubs: ContosoVirtualWANHub-WestUS

    • Subscription: no changes

    • Resource Group: ContosoResourceGroup

    • Virtual network: ResearchVNet

    • Propagate to none: Yes

    • Associate Route Table: Default

  5. Select Create.

Congratulations! You have created a Virtual WAN and a Virtual WAN Hub and connected the ResearchVNet to the hub.

Task 4: Clean up resources

Note: Remember to remove any newly created Azure resources that you no longer use. Removing unused resources ensures you will not see unexpected charges.

  1. On the Azure portal, open the PowerShell session within the Cloud Shell pane.

  2. Delete all resource groups you created throughout the labs of this module by running the following command:

    Remove-AzResourceGroup -Name 'ContosoResourceGroup' -Force -AsJob

    Note: The command executes asynchronously (as determined by the -AsJob parameter), so while you will be able to run another PowerShell command immediately afterwards within the same PowerShell session, it will take a few minutes before the resource groups are actually removed.